Your testing specialist

Multimeter UNI-T UT181A

Code 07720166
Go to shop
  • Description

    UNI-T UT181A

    DC Voltage 60mV/600mV/6V/60V/600V/1000V ±(0.025%+5)
    AC Voltage 60mV/600mV/6V/60V/600V/1000V ±(0.3%+30)
    DC Current 600μA/6000μA/60mA/600mA/10A ±(0.08%+10)
    AC Current 600μA/6000μA/60mA/600mA/10A ±(0.6%+20)
    Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.05%+2)
    Admittance 60nS ±(2%+10)
    Capacitance 6nF/60nF/600nF/6μF/600μF/6mF/60mF ±(2%+5)
    Frequency (Hz) 10Hz - 60MHz ±(0.01%+5)
    Temperature -40°C°~1000°C * ±(1.5%+50)

    Display Count 60000
    Auto Range
    Manual Range
    True RMS
    Bandwidth 100kHz
    Low Pass Filter
    Continuity Buzzer
    Duty Cycle
    Dual Temperature Measurement
    Data Hold
    Peak Hold
    Relative Mode
    Datalogging 20000
    Trend Capture
    Date Time Display
    Data Comparison
    Display Type 3.5" 320x240 64k colour
    Backlight Adjustment
    Analogue Bargraf
    USB Interface
    Mis-Plug Alarm
    Battery Indication
    Auto Power Off
    Re-Chargeable Battery
    Input Protection
    Input Impedance DCV 10MΩ+

    Power: 7.4V 2200mAh Li-ion Battery
    Weight: 638.6g
    Size: 103x225x59mm
    LCD Size: 70x52mm
    Accessory: Battery, Test Lead, Temperature Adaptor, Point Contact Temperature Probe x2, Power Adaptor, PC software CD, USB interface cable

  • Discussion 6
    Martin Richard Egan Martin Richard Egan 08. 09. 2020 | 18:31

    why does my 181a measure 68 K Ohms om a 100K Ohm resistor also if you measure a 680k Ohm resistor? Also it cannot read it on the auto ranging setting is the instrument faulty ?

    Mine has develop a vertical yellow line, can i get a replacement display or fix anyway?

    i have lost my software cd. were can I donwload the file. Thanks

    My meters display has developed a fault. There are three solid lines (2 vertical 1 horizontal). How can I get a new/replacement screen or can it be fixed another way?

    No, thís is normal.

    1 2 »

Skype Facebook Twitter